ZINGA IS A FILM GALVANISING SYSTEM COMPRISING PRECISELY MILLED ZINC PARTICLES SUSPENDED IN A UNIQUE AROMATIC LIQUID BASE.
Zinga will bond to any prepared steel substrate to form a finished surface layer of 96% zinc. Zinga offers all the advantages of hot-dip galvanising and thermal zinc spray but without the application and over coating problems. Zinga has been approved to NORSOK Standard M-501 Revision 5 to meet the exacting demands of the Oil and Gas Industry.
- IT IS EASY TO USE – APPLY BY BRUSH, ROLLER, SPRAY OR DIPPING
- PROTECTS LONGER THAN HOT-DIP GALVANISING – AND NO DISTORTIONS, FETTLING OR DRILLING TO DE-GAS
- CAN BE APPLIED ON SITE – REGARDLESS OF STRUCTURE, SIZE AND SHAPE
- RE-COATS EXISTING GALVANISING – NO DISMANTLING REQUIRED
- CAN BE RE-CHARGED – FUSING WITH THE FIRST COAT TO FORM A SINGLE LAYER
- EXCELLENT PRIMER IN DUPLEX SYSTEMS – CAN MORE THAN DOUBLE THE LIFESPAN
- HIGH RESISTANCE TO MECHANICAL ABRASION – USED TO COAT PILLING, RAIL TRACK AND CHAIN
- EXCELLENT ADHESION – EXTREMELY HIGH PULL-OFF RESULTS ACHIEVED
- EXTREMELY FLEXIBLE – WILL NOT CRACK OR DE-LAMINATE, UNLIKE H.D.G.
- CAN BE APPLIED TO DAMP SURFACES – UP TO 90% RELATIVE HUMIDITY
- CAN BE APPLIED IN EXTREME TEMPERATURES – MINUS 15˚C TO PLUS 40˚ C
- WELDABLE TO X-RAY QUALITY – WELD STEEL THROUGH 60MM OF ZINGA
- CERTIFIED FOR USE WITH POTABLE WATER – BS6920(2000)
- CERTIFIED AS NON-FLAMABLE – BS476 PART 6 & 7 FIRE PROPAGATION
- SUITABLE FOR LARGE AND SMALL AREAS – FROM THE LARGEST BRIDGES TO SMALL NUTS AND BOLTS